All Done but just getting started

Here are some pictures of the completed extension for Munibung and my new model workshop.

I'm very happy the way it turned out despite the delays. Part of Munibung has already been moved into the new room. It will be located under the small window. A new work bench will go under the large window (hence the power points)

The most important thing is the cat approves



Model railway-ing has taken a bit of a back seat as I have been working on the trikes. With the acquisitions of the TIC it has enabled the use of their engines to repair others.

When I pulled apart Wickham 526s engine , the poor thing was worn out and in a worse state than I thought, nothing a complete overhaul won't fix. At the same time I have been working on an engine for a friend.

Right now I am waiting on a parcel from the US of A with some Wisconsin parts to complete the rebuilds.



Motorcar Consortium Ltd.

You might have gathered already that not only are my interest with model railway but the also the 12" to the 1' as well. Particularly track vehicles know as trikes, motorcars or section cars. I have been involved with them since I was 10 years old when my Uncle started collecting Railway paraphernalia in 1988. Since then it's has been a bit of a passion to restore and run these vehicles on the rail. 

I first heard about the Motorcar Consortium a few years ago, it is only recently that they have been accepting memberships.

The consortium is organising a  induction workshop set for the 1st and 2nd of September 2012. I encourage anyone that would like to be involved to sign up by making contact with them through their website.

Below is a short video of a VW gang car in action leaving the Crookwell railway yard.



A post for post sake

Just thought I would waste some electrons and post a small update.

The new extension to the layout room is almost finished, the carpet is yet to be delivered and laid. I must say the room turned out pretty good considering some of the compromises that had to be made.

I haven't been playing with the models railway for a while. The last time a train ran would have been 5 months and that was to show a friend how it all worked otherwise it would be close to a year. That still hasn't stopped me from attending shows and stockpiling models.

I have spent some time tinkering with the new trikes in the collection. Since the TICs I have managed to collect two more flat top trailers, and another Villiers quadracycle. Parts from the new TICs are being used for my Wickham, 526. It is undergoing some repairs.

Other than that there has been little spare time.


That's about it for now. Next update will have some photos of the new room and other things.

Just what have I gotten myself into???

Yep! I've done it now. I held off for so long because I knew what it would do and it did do what I thought it would do and now that it has done what it did. Now I'm convinced by what it did do is the best thing to do for the future of my layout.

 The chance for a cheap one turned up and I thought a little play around wouldn't hurt and besides all that button pressing would surely turn me off? Not a chance.

For the last couple of weeks I have been running up and down on my 8' portable layout (glorified test track). This weekend I picked up a couple more decoders and a USB controller from the MRRC stand at the Canberra show.

Once the extension is finished and Munibung is moved the full conversion to DCC is likely to take place. The rate the extension is coming along, that could be while yet. ;)

Pays to be patient...

Back in 2005 a group of members of the Goulburn Crookwell Heritage Railway travelled to north west Sydney to transport 8 trikes from private collection back to Crookwell. These were on loan to the GCHR.

My Father and I were among that group with the trusty (now scraped) XF Falcon with car trailer in tow. Neither of us live close to Sydney or Crookwell so it was a long day, if i recall it was 16 hours from go to whoa. Anyway, on the trailer was 2 flat top trailers, 2 TICs and an ST2 Fairmont. Efforts were made to make these part of my collection however he owner didn't want to sell at the time.

So! after 6 years of waiting and waiting aaannnd waiting...The TICs are finally in my possession.  Sadly time has not done them any favors, the elements and rotten thieves have taken their toll. The body work and chassis' are write-offs from rust and important parts are missing since they were delivered.

Here is TIC 60/60

The parts missing (read stolen) are the fuel tank, the headlight, ignition coil and clutch adjuster. The last being near impossible to replace being long out of production. And to top it off, being left out in the weather for the last 3.5 years, the engine is siezed.

TIC 60/229

Pinched from 229 was the carburetor and air cleaner, clutch adjuster and just in the last week the pulley ring off the flywheel. Its engine is seized as well.

It was to be expected really, they have been out in the open, anyone and everyone had access to them. Just a shame as they were complete. I can't complain to much, the deal was right and I got them for far less than I was offering 7 years ago.

All loaded in Sydney ready to leave for Crookwell 2005

Neither will be restored, their parts will be used to put other TIC chassis I have together, 60/113. It can be seen on my site www.nswgrtrikes.4t.com









Some Piccy's

Not many pictures have been taken, to busy building the thing.

Anyway, here are a few...

 Just after the bathroom demolition

On the left is my trike restoration to-do pile.

 Site all cleaned up, levelled to with in 3mm and form work assembled for the concrete. The sheet of MDF was used as a square.

 Then we skip many months and it's lock-up!

 The view from just inside the door. The wall on the right is the existing shed

 Looking from the small window

 Left pan of the above shot.

Taken from the layout side. Plenty of holes to fill in.

Dad and I have decided to have a weekend off. Going for a trip to Sydney for a model railway supply run and swing by Train Works to have a squiz at the new look museum.

Progress and new toys

I hope everyone had a great Christmas and new year.

The new building has been full steam ahead. Over the Chrissy break the frame, roof and outer walls went up and is now in the lock up stage. It's now back to weekend work fitting out in inside.

Thanks to Santa, he delivered some building tools, drop saw, table saw, cordless drills, levels, hand tools... certainly makes the job easier. Dad was saying how far things had come when he and his parents hand build their first house without power tools in the 50's. Just an imperial tape measure, pencil, hand saw, chisel, and a hammer. He said, what would have taken 2 weeks 'back in the day' we did in 24 hours.

Australia Day is here again! So to celebrate the birth of a nation the ceiling is going up and a start will be made modifying the internal wall (old external wall of existing shed). I've more than likely jinxed the time table again, but in a month it should be ready to move in. Only 3 months behind the original schedule.


The model collection has grown as well over the holiday period. 3 x TrainOrama 44s, 2 packs of NHDF hoppers, all 3 packs of Columbia Models BCWs. The last being a present from the folks.

 I scored a L and C Kits Powerline chassis conversion kit for an 81 class off eBay and with another auction 2 x C class bogies and motor. When I find the time this will go under 8115, my first HO scale model. It will be good to have this loco running around the layout again.


I'll post some picture after this weekend.